CompuLock

 Security  Systems
  • FL0001 "FloorLock
  • Concrete Floor/Ceiling  Anchor Mounting Kit"
 INSTALLATION GUIDE
Suitable for:
BlockLock Heavy Duty Security kit: where the maximum anchoring strength is required or no other suitable mounting point is available. Any equipment that needs to be anchored to a concrete floor, wall (concrete or brick) or ceiling.
Kit includes:
1 x specially designed steel BlockLock hosing. 1x 8mm concrete locking bolt, Lifetime warranty.
Floor (typical installation)
Locate appropriate anchor point.

Taking special note of:

  • Length of cable to the equipment.
  • Position that doesn't obstruct furniture or building structure.
  • A position that will not  cause any injury to persons.
  • Any unseen electrical or plumbing object  that you may be drilling into.

Drill hole in concrete or wall

  • Using a good quality 8mm Masonry drill bit and impact drill: dill a hole to a minimum depth of approximately 25mm .

Mount the FloorLock
  • Using a 6mm Allen Key or 6 mm Allen Key socket fit the FloorLock to the drilled hole as per diagram

 
Attaching BlockLock and Cable
  1. Slide in BlockLock
  2. Align locking hole with cable (top or side holes can be used). then press closed the locking barrel.  

Note* Security devices offer varying levels of deterrent, prevention and protection. No device or practice can guarantee 100%  protection. Neither  seller or manufacturer shall be liable for any loss or damage, direct, incidental or consequential arising from the use or the inability to use this product.