CompuLock

 Security  Systems
Paper Trays on Printers" INSTALLATION GUIDE
Suitable for:
Laser Printers, Photocopiers and Ink Jet Printers with Two Paper Trays where there is a separator between the trays and are exposed at at the rear.
Parts required:
2 x specially CaseLock Assemblies (AM0017). 1 x Steel Patch Cable (AM0014), 1 x 30mm case hardened padlock, (AM0031)
Laser Printer (typical installation)
  1. Carefully examine the back of the printer trays, noting the best position for drilling two tiny hole for mounting the case locking assemblies. The location should not interfere with the paper or the paper loading mechanisms.
  1. Carefully drill two 2mm holes in the plastic in the appropriate locations.
  1. Carefully drill two 2mm holes in the plastic in the appropriate locations. then mount the case locks with the self-tapping screws provided.
  1. Finally tread the patch cable through the case locks on both trays and then lock the loop with the padlock. surface.