CompuLock

 Security  Systems
Paper Trays on Printers, Photo Copiers" INSTALLATION GUIDE
Suitable for:
Laser Printers, Photocopiers and Ink Jet Printers with front or side loading paper trays, that can accommodate a two part overlapping locking mechanism (see Photo).

The mechanism is fitted with 3M Very High Bond (VHB) adhesive tape, and when attached correctly is extremely hard to remove. The two parts should interlock allowing the fitting of a small padlock to effectively stop the sliding (opening) of the printer paper tray.
Additional Parts required:
30mm or similar padlock to lock the two plate together, (AM0031)
Laser Printer (typical installation)
  1. Carefully examine the paper tray location and operation, especially noticing the overlap of the paper draw (TRAY)  and the side wall of its compartment.
  1. Assemble the two locking plates of the tray locking kit as they would be mounted on the printer. Do not remove the backing tape at this stage. Position the assembled mechanism in the most suitable location. Ideally the  to be able to

UNDER CONSTRUCTION
  1. Carefully

UNDER CONSTRUCTION

 

  
  1. Finally attach the padlock into the padlock hole to lock the tray closed.