Note* Security devices offer varying levels of deterrent, prevention and protection.
No device or practice can guarantee 100% protection. Neither seller or manufacturer
shall be liable for any loss or damage, direct, incidental or consequential arising
from the use or the inability to use this product.
“NoteBook Anchor” CA0006n (Heavy Duty)
1 x Notebook Lock. 2 x Security Key to suit. Lifetime warranty.
Notebook Computers (typical installation)
- Locate the pest position for you notebook. Determine the best anchor point. This
may be to loop the cable around a sturdy leg of fixture where it cannot be undone
without unlocking the notebook cable lock.
- If no anchor point is available, an optional anchor plate may need to be fitted.
- Begin the installation at the anchor point. Attach the security cable to fixed location
as shown below, or mount the adhesive anchor plate to underside of desk. (One way
security screws are provided for extra strength.
- Thread the cable through the cable trap (if appropriate).
- Unlock the locking head with the key supplied (the key will remain attached when
unlocked).
- Locate the security slot on computer and insert the locking pins into the security
slot. Taking care that the locking pins are fully inserted, gently turn the key to
rotate the “T” pin in the slot.
- The key can be removed when the cable is locked.
- Check to see if your cable is firmly attached.
Optional: For Anchor Plate
Drill & Flat Blade Screwdriver
Additional Parts required:
Optional: Anchor Plate for Some locations